[. . . ] In order to have a program in accordance with the expected cycle, it is absolutely necessary to disable the sanitizing function. [. . . ] In order to have a program in accordance with the expected cycle, it is absolutely necessary to disable the sanitizing function. In this case, follow the protocol bellow : _ Choose the “EN 50242” (See page 18 - 19) standard program, _ Press the “Start” key, until obtaining the flashing of the “Multifunction product” light, _ Then, choose the program to be tested. €¢ Details common to all models — Washing capacity - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - — Arrangement of the items - - - - - - - - - - - - - - - - - - - - - - - - - - - - — Setting for upper basket - - - - - - - - - - - - - - - - - - - - - - - - - - - - - — Setting for rinsing product distributor - - - - - - - - - - - - - - - - - - — Adjusting the water softener - - - - - - - - - - - - - - - - - - - - - - - - - - (See § 5 for details). 5 mmol/l (See § 5 for details) — Check that the water softener is correctly set for the water hardness — Pull out the detergent distribution drawer and place the tablet in the interior compartment. €¢ Built in or full built in model : Measuring the noise level in accordance with Standard EN60704-2-3 — Align the plinth on the housing unit with the door panel. [. . . ] 5 mmol/l (See § 5 for details) — Check that the water softener is correctly set for the water hardness — Pull out the detergent distribution drawer and place the tablet in the interior compartment. [. . . ]